Flat Panel Display Lifts

    Features common to Electric Ceiling Lift:
  • Smooth, quiet travel with exclusive Auto-Tilt for a hidden installation solution
  • PAC-140 Q-Clamp accessory included
  • Auto-Tilt adjustment
  • Adjustable travel limit to set your viewing position
  • Shroud covered ceiling opening in the lowered position
  • Cable management system
  • Two mounting methods
  • Display installs in landscape view only
  • Exclusive Q-Latch Mounting System secures the Large Flat Panel Display with a lockable latch
  • All components are UL, CSA and VDE listed
    Specifications common to Electric Ceiling Lift:
  • Tilt: 15 degrees
  • Voltage: 120V or 230V
  • Low Voltage: Will accept 5 amp 30V AC/DC for triggering commands
  • Compatibility: Interface brackets are compatible with all other 2000 Series products
  • Color: Black
  • Lift Capacity: 230 lbs. 104.32 kg
Two Mounting Methods:
  • Four 3/8" Threaded Rods. Attach to the top of the lift for precise leveling
  • Side Mounting. Through bolting to wood framed structure or similar.
  • Note: Both methods can be used in the same installation if desired.
Control Options:
  • Single Momentary Pushbutton. . . . . . . . Included
  • Integrated Control (AMX/Crestron). . . . . Connects to 2 dry contacts
  • Infrared Remote Control . . . . . . . . . . . . . Order IR-10 accessory
  • Radio Frequency Remote Control. . . . . Order RC-10 accessory
  • Voltage Trigger . . . . . . . . . . . . . . . . . . . . . Lift will extend while voltage is present, 5–30V AC/DC


Features common to Pop-Up Lift:
  • Smooth, quiet cycling
  • PAC-140 Q-Clamp accessory included
  • Reliable, chain driven
  • Quick and easy installation
  • Low-voltage controlled
  • Adjustable travel limit
  • Display installs in portrait/landscape views
  • Exclusive Q-Latch Mounting System secures the Large Flat Panel Display with a lockable latch
  • Electrical components are UL, CSA and VDE Listed
Control Options:
  • Single Momentary Pushbutton. . . . . . . . Included
  • Integrated Control (AMX/Crestron). . . . . Connects to 2 dry contacts
  • Infrared Remote Control . . . . . . . . . . . . . Order IR-10 accessory
  • Radio Frequency Remote Control. . . . . Order RC-10 accessory
  • Voltage Trigger . . . . . . . . . . . . . . . . . . . . . Lift will extend while voltage is present, 5–30V AC/DC
Specifications common to Pop-Up Lift:
  • Outside Adjustable Width: Field adjustable Minimum & Maximum 44 1.4" X 56 1.4" ; 112.4cm X 142.9cm
  • Inside Adjustable Width: Minimum & Maximum 42 1.4" X 54 1.4" ; 107.3cm X 137.8cm
  • Travel speed: Approximately 1" per second
  • Voltage: 120V or 230V
  • Low Voltage: Will accept 5A 30V AC/DC for triggering commands
  • Compatibility: Interface brackets are compatible with all other 2000 Series products
  • Color: Black
  • Weight Capacity: 230 lbs. 104.32 kg