Projector Lifts

Smart Lift SL36

Features specific to SL236-FD:

  • Two internal outlets, one is switched on 110V units
  • Plenum-rated
Specifications common to Smart-Lift SL236 "CALL FOR AVAILABILITY":
  • Downward Travel: 36 inches ; 914.40 mm
  • Minimum Clearance Above Ceiling: 11 inches ; 279.4 mm
  • Overall Dimension (Up Position - HxWxD): 11 x 25 x 27.5 inches ; 279.40 mm x 635 mm x 698.50 mm
  • Maximum Projector Size (HxWxL): 9.5 x 20 x 23.25 inches ; 241.3 mm x 533.40 mm x 590.55 mm
  • Ceiling Opening (WxD): 25.5 x 27.75 inches ; 641.35 mm x 704.85 mm
  • Ceiling Closure Panel (WxD): 24 x 24 inches ; 609.60 mm x 609.60 mm
  • Voltage: 120V or 230V
  • Low Voltage: Will accept 5a AC/DC for triggering commands
  • Current Draw: 0.75 Amps Continuous. All electrical components are UL, CSA and VDE listed
  • Net Weight: 85 lbs. 38.46 kg
  • Lift Capacity: 35 lbs. 15.9 kg
    Projector Adjustment Features:
  • Roll ± 2 degrees
  • Pitch ± 15 degrees
  • Yaw ± 10 degrees
  • Fore/aft and right/left projector cradle positioning
  • Color: White
Four Mounting Methods:
  • 1. Four 3/8" Threaded Rods. Use with SMA-650 accessory. Allows quick and accurate leveling needed for a quality installation.
  • 2. 1 1/2" Threaded Extension Column. Must use SMA-600 accessory. Allows adjustments (2 1/2" fore/aft and 2 1/2" left/right) for exact placement.
  • 3. Joist tabs built-in for side mounting directly to wood framed ceilings commonly found in residential applications.
  • 4. Suspend by cables. Must use SMA-650 accessory. Use this option when distance from the structure or overhead equipment prevent more traditional mounting methods.
Features common to SMART-LIFT SL-150:
  • Plenum rated
  • Low profile – 11" overall height
  • 8 1/4" of travel distance
  • Low voltage controlled
  • Suitable for push-up table top installation
  • Projector Roll, Pitch and Yaw
  • Fore/aft, left/right projector positioning
  • Vertical projector cradle adjustment
  • Quick projector disconnect/reconnect
  • Three mounting methods
  • Two internal outlets, one is switched on 110V units
  • Used with finished or suspended ceiling
  • Horizontal and vertical cradle positioning
  • All electrical components are UL, CSA and VDE listed
Specifications common to SMART-LIFT SL-150:
  • Downward Travel: 8 1/4" / 209.55mm
  • Minimum Clearance Above Ceiling: 11 inches
  • Overall Dimension (Up Position - H x W x D): 11" x 22 1.8" x 26 1.8" ; 279.4mm x 562mm x 664mm
  • Maximum Projector Size (HxWxL): 9.5 x 18 x 22.25 inches
  • Ceiling Opening (WxD): 22" x 25 3.4" (+3/8", -0") ; 558.8mm x 654.1mm
  • Ceiling Closure Panel (WxD): 19 5.8" x 23 3/8" ; 498.6mm x 593.8mm
  • Voltage: 120V or 230V
  • Low Voltage: Will accept 5a 30V AC/DC for triggering commands
  • Current Draw: 0.9 Amps continuous
  • Net Weight: 66 lbs. 29.7 kg
  • Lift Capacity: 35 lbs.
Projector Adjustment Features:
  • Roll ± 2 degrees
  • Pitch ± 12 degrees
  • Yaw ± 5 degrees
  • Horizontal and vertical cradle positioning
Three Mounting Methods:
  • 1. Three 3/8" Threaded Rods. Three point mounting for easier leveling.
  • 2. 1 1/2" Extension Column with SMA-600. Provides 1 1/2" horizontal adjustment.
  • 3. Side mounting using the built in joist tabs. Allows installation directly into wood framed ceilings.